WORK 80

Quality Specifications

Glutaraldehyde (min): 15g Solvent (distilled water) qs 100 ml

Ingredients

Glutaraldehyde, Solvent (distilled water).

Usage Guide

• Dilute the product with clean water 50 - 100 times, and broadcast evenly across the pond surface, turn on all paddlewheels, enhance bottom oxygen when using the product, and should be used on sunny days.
• Pond preparation water treatment: 1 kg/1,000 m³ of water.
• Disinfect bacteria and fungi before stocking shrimp: 1 kg/1,000 - 1,500 m³ of water.
• During farming: 1 kg/1,500 - 2,000 m³ of water.
• Treatment for bacteria, Protozoa, Zoothamnium on shrimp: 1 kg/1,000 - 1,500 m³ of water.
• Note: For sedimentation ponds and ready ponds: If the water contains many protozoa, undesirable algae, snails, barnacles, or bivalves, combine with 1 kg copper sulfate broadcast 30 minutes later; it can be used after 24 - 48 hours.
  • Water should be cleaned and settled before disinfection for better efficacy.
  • Siphon and remove dead plankton (phytoplankton and zooplankton) to avoid pollution.
  • After 24 hours, treatment probiotics should be supplemented.
  • Shake the product well before use.
  • Adjust the dosage accordingly depending on the actual pond conditions, stocking density, and shrimp health. - The product has an unpleasant odor and may cause skin, eye, and nasal irritation/allergies, so wear protective gear when diluting and broadcasting. - Close the bottle/container lid immediately after use if the product is not fully consumed.