How to use PREMIX EDTA?

Đối với quy cách 1 kg: Pha sản phẩm với nước sạch, tạt đều khắp ao, bật hết hệ thống sục khí khi sử dụng sản phẩm. Trước khi thả tôm: Khử độc tố, phèn, kim loại nặng sau khi xử lý Chlorin: Kết hợp 10kg Thiosulfate + 3 - 5 kg PREMIX EDTA/2.000 m3 nước. Trong quá trình nuôi: 3 - 5 kg/2.500 - 3.000 m3 nước. Khử phèn và kim loại nặng trong nước và trong đất ao nuôi: 3 - 5 kg/2.000 - 2.500 m3 nước. Khi tôm bị vàng mang, vàng chân do nhiễm phèn: 3 - 5 kg/1.500 - 2.000 m3 nước. Lưu ý: Nên xử lý hạ phèn

Main benefits of PREMIX EDTA?

Khử phèn và trung hòa các ion kim loại nặng làm ô nhiễm môi trường trong nước và đất đáy ao.. Làm sạch mang trong trường hợp tôm vàng mang, vàng chân do ao bị xì phèn hoặc nhiễm phèn rửa trôi từ bờ ao do mưa lớn.. Hỗ trợ xử lý đen mang do môi trường, vàng mang khi hàm lượng NO2 cao.. Giảm độ cứng nước (Mg, Ca), cân bằng ion và áp suất thẩm thấu cho tôm khi độ cứng, độ mặn quá cao.

🐟 Than Vuong Fish

PREMIX EDTA

Liên kết ion kim loại, hạ phèn (sắt, nhôm, mangan), khử độc tố trong nước

Benefits

Neutralize alum and heavy metal ions that pollute the environment in water and pond bottom soil.
Clean the gills in cases of shrimp with yellow gills and yellow legs due to pond acidification or acid sulfate soil runoff from the pond bank caused by heavy rain.
Supports treatment of environmentally-induced black gills, and yellow gills when NO2 levels are high.
Reduce water hardness (Mg, Ca), balance ions and osmotic pressure for shrimp when hardness and salinity are too high.

🔖 MSTN: 02020698📄 TCCS: TCCS 16:2020/TV🏷️ Powder📋 GCN: 02020698

💬 Free Zalo consultation

Quality Specifications

EDTA (min): 6.5%

Ingredients

EDTA.

Usage Guide

For 1 kg packaging: Dilute the product with clean water, broadcast evenly throughout the pond, turn on all aeration systems when using the product.
Before stocking shrimp: Detoxify, remove alum, heavy metals after Chlorin treatment: Combine 10kg Thiosulfate + 3 - 5 kg PREMIX EDTA/2,000 m³ of water.
During cultivation: 3 - 5 kg/2,500 - 3,000 m³ of water.
Remove alum and heavy metals in the water and pond soil: 3 - 5 kg/2,000 - 2,500 m³ of water.
When shrimp have yellow gills, yellow legs due to alum contamination: 3 - 5 kg/1,500 - 2,000 m³ of water.
Note: Alum reduction should be performed from settling ponds, ready ponds.
- Siphon off bottom water if there is significant alum sedimentation.
- Adjust the dosage according to the actual pond conditions, stocking density, and shrimp health.
- Seal tightly, zip the bag immediately after use if the product is not fully consumed.
- For 5, 10 kg packaging: Dilute the product with clean water, broadcast evenly throughout the pond, turn on all aeration systems when using the product.
- Before stocking shrimp: Detoxify, remove alum, heavy metals after Chlorin treatment: Combine 10kg Thiosulfate + 3 - 5 kg PREMIX EDTA/2,000 m³ of water.
- During cultivation: 3 - 5 kg/2,500 - 3,000 m³ of water.
- Remove alum and heavy metals in the water and pond soil: 3 - 5 kg/2,000 - 2,500 m³ of water.
- When shrimp have yellow gills, yellow legs due to alum contamination: 3 - 5 kg/1,500 - 2,000 m³ of water.
- Note: Alum reduction should be performed from settling ponds, ready ponds.
- Siphon off bottom water if there is significant alum sedimentation.
- Adjust the dosage according to the actual pond conditions, stocking density, and shrimp health.
- Seal tightly, zip the bag immediately after use if the product is not fully consumed.

What should this product be used with?

PREMIX EDTA is often combined with products from Than Vuong Fish for best results.

AQUA PRO4000X SOILMAX New SOILMAX

Detailed Article

Broadcast the product into the pond, focusing on areas where alum accumulates, operate aerators and increase aeration for a faster reaction.

Recommended dosage:

Pre-stocking treatment and when pond water is contaminated: 3 - 5 kg/1,500 - 2,000 m³of water, to detoxify heavy metals and help improve the pond water environment before stocking.
When directly adding external water to the pond: 3 - 5 kg/3,000 - 4,000 m³of water, helps to quickly neutralize and decompose heavy metals in the water.
Detoxification due to overdose of chemicals such as potassium permanganate, copper sulfate: 3 - 5 kg/1,000 m³ of water.
To reduce water hardness: 2 - 4 kg/1,000 m³ of water, depending on calcium concentration.